LogoLogo
  • 1. GASFLOW Code
    • 1.1. Overview
    • 1.2. Code Approach
    • 1.3. Code Features
    • 1.4. Graphical User Interface
    • 1.5. Code V&V
    • 1.6. Application Highlights
    • 1.7. Publications
    • 1.8. Current Activities
  • 2. Tutorials
    • 2.1. Overview
    • 2.2. Sod's Shock Tube Problem
    • 2.3. Mesh Generation from CAD Models
    • 2.4. 2D Lid-driven Cavity Flow
    • 2.5. Hydrogen Diffusion into Air in a 1D Duct
    • 2.6. Supersonic Flow over a Forward-facing Step
    • 2.7. Vented Explosion of Premixed Hydrogen-Air Mixtures
    • 2.8. Transient Laminar Jet Flow at Low Mach Number Regime
  • 3. Brief User Guide
    • 3.1. Overview
    • 3.2. General User Guidance
    • 3.3. Unit System and Files
    • 3.4. Mesh Generation
    • 3.5. Geometry Definition
    • 3.6. Numerical Control
    • 3.7. Gas Species and Properties
    • 3.8. Initial and Boundary Conditions
    • 3.9. Solid Heat Structures
    • 3.10. Physical Models
    • 3.11. Restart and Output
    • 3.12. GASFLOW Parallelization
  • 4. Pre- and Post-Processing Tools
    • 4.1. GASVIEW
    • 4.2. Pyscan
    • 4.3. Create3D
  • 5. Verification and Validation
    • 5.1.Overview
    • 5.2. Fluid Dynamics
      • [AS-FD 1] Steady-State and Laminar Flow Startup
      • [AS-FD 2] Transient Compressible Flow
      • [AS-FD 3] Diffusion of Hydrogen into Air
      • [AS-FD 4] Flow past a Rectangular Block
      • [AS-FD 5] 1D Flow with an Orifice
      • [ED-FD 1] Incompressible Laminar Flow in a Lid-driven Cavity
      • [ED-FD 2] Stationary Turbulent Channel Flow
      • [ED-FD 3] Turbulent Flow between Two Parallel Plates
      • [ED-FD 4] Flow over Backward-Facing Step
      • [ED-FD 5] Transient Supersonic Flow at Mach 3 over a Forward-facing Step
      • [ED-FD 6] Large Eddy Simulations of the Turbulent Jet Flow
      • [ED-FD-7] Hydrogen Turbulent Dispersion in Nuclear Containment Compartment
      • [ED-FD 8] Buoyant Jet from Unintended Hydrogen Release
      • [ED-FD 9] Radiolytic Gas Accumulation in a Pipe
      • [ED-FD 10] Supersonic Flow at Mach 2 over a Backward Facing Step
    • 5.3. Combustion
      • [ED-CM 1] BOM Spherical Combustion Chamber
      • [ED-CM 2] SNL Flame Acceleration Measurement Facility Experiment
      • [ED-CM 3] Hydrogen Deflagration in a Multi-compartment System
      • [ED-CM 4] Hydrogen Jet Fire in a Compartment with Venting Hole
      • [ED-CM 5] Hydrogen-Air Fast Deflagration in ENACCEF Facility
      • [ED-CM 6] Detonation of Premixed H2-Air Mixture in a Hemispherical Balloon
      • [ED-CM 7] H2 Deflagration at a Refueling Station
      • [ED-CM 8] Methane-Air Explosion in LLEM
      • [ED-CM 9] Hydrogen-Methane Combution in a 20 L Spherical Vessel
    • 5.4. Heat and Mass Transfer
      • [AS-HT 1] Steady-State Heat Transfer through a Wall
      • [AS-HT 2] Pressure-Volume Work Term 1: Equilibrium Case
      • [AS-HT 3] Thermodynamic Benchmarks
      • [AS-HT 4] Uniform Energy Addition to Stagnant Fluid
      • [ED-HT 1] Natural Convection in an Air-filled Square Cavity
      • [ED-HT 2] Validation of the condensation model with COPAIN facility
      • [ED-HT 3] Heat and mass transfer of a thin film model in a channel
      • [ED-HT 4] Validation of the Film Model in the Integral Test Facility for Passive Containment Cooling
      • [ED-HT 5] Stratification Erosion Benchmark
      • [ED-HT 6] Battelle Containment HYJET Test JX7
      • [ED-HT 7] Battelle GX Tests
      • [ED-HT 8] Tests in ThAI Facility
      • [ED-HT 9] HDR Tests
      • [ED-HT 10] Phebus Thermal Hydraulic Tests
      • [ED-HT 11] Test Tosqan ISP47
      • [ED-HT 12] Test MISTRA ISP47
      • [ED-HT 13] Panda SETH Test Program
    • 5.5. Multiphase Flow
      • [AS-MP 1] Particle Terminal Velocity
      • [AS-MP 2] Water droplet evaporation
      • [ED-MP 1] Spray Single Droplet Test
      • [ED-MP 2] Spray Droplets Test 113 at IRSN TOSQAN
      • [ED-MP 3] Spray Droplets Test 101 at IRSN TOSQAN
  • 6. APPLICATION HIGHLIGHTS
    • 6.1. H2 Fuel Cell Vehicle Accident in Tunnel
    • 6.2. Hydrogen Explosion in a Refueling Station
    • 6.3. Hydrogen Explosion at Fukushima Accident
    • 6.4. Methane Explosion in the Roadway of a Coal Mine
    • 6.5. Aerosols and Droplets
      • 6.5.1. Coronavirus Aerosol Transmission
      • 6.5.2. Water Droplets
  • 7. Ongoing Development and Enhancements
    • 7.1. Combustion Modeling
      • 7.1.1. Multi-step Global Methane Combustion Models
        • 7.1.1.1. One-step Reaction Mechanism
        • 7.1.1.2. Two-step Reaction Mechanism
        • 7.1.1.3. Three-step Reaction Mechanism
        • 7.1.1.4. Four-step Reaction Mechanism
        • 7.1.1.5. Five-step Reaction Mechanism
        • 7.1.1.6. FAQ
      • 7.1.2. Laminar Flame Speed Correlations for Methane-air Mixtures
        • 7.1.2.1. Stone's Correlation
        • 7.1.2.2. Elia's Correlation
        • 7.1.2.3. Takizawa's Correlation
        • 7.1.2.4. Liao's Correlation
      • 7.1.3. Turbulent Flame Speed Correlations for Methane-air Mixtures
      • 7.1.4. Correction of Effective Turbulent Burning Velocity for Lean Hydrogen-air Mixtures
      • 7.1.5. Induction Time Model
      • 7.1.6. Detailed Chemical Kinetic Modeling
      • 7.1.7. Jet Flame Modeling
    • 7.2. Discrete Particle Modeling
      • 7.2.1. Particle mass in user-defined volumes - volpardef
      • 7.2.2. Particle injection from ring shaped volumes
    • 7.3. Heat Transfer Modeling
      • 7.3.1. Time-dependent tables for heat flux and heat transfer coefficient in sinkdef
      • 7.3.2. Thermal Radiation Model for Water Vapor and Carbon Dioxide
  • 8. Frequently Asked Questions
    • 8.1. How to set up models for the flashing of pressurized water?
Powered by GitBook
On this page

Was this helpful?

  1. 5. Verification and Validation
  2. 5.4. Heat and Mass Transfer

[ED-HT 4] Validation of the Film Model in the Integral Test Facility for Passive Containment Cooling

Previous[ED-HT 3] Heat and mass transfer of a thin film model in a channelNext[ED-HT 5] Stratification Erosion Benchmark

Last updated 1 year ago

Was this helpful?