LogoLogo
Ctrlk
  • 1. GASFLOW Code
    • 1.1. Overview
    • 1.2. Code Approach
    • 1.3. Code Features
    • 1.4. Graphical User Interface
    • 1.5. Code V&V
    • 1.6. Application Highlights
    • 1.7. Publications
    • 1.8. Current Activities
  • 2. Tutorials
    • 2.1. Overview
    • 2.2. Sod's Shock Tube Problem
    • 2.3. Mesh Generation from CAD Models
    • 2.4. 2D Lid-driven Cavity Flow
    • 2.5. Hydrogen Diffusion into Air in a 1D Duct
    • 2.6. Supersonic Flow over a Forward-facing Step
    • 2.7. Vented Explosion of Premixed Hydrogen-Air Mixtures
    • 2.8. Transient Laminar Jet Flow at Low Mach Number Regime
  • 3. Brief User Guide
    • 3.1. Overview
    • 3.2. General User Guidance
    • 3.3. Unit System and Files
    • 3.4. Mesh Generation
    • 3.5. Geometry Definition
    • 3.6. Numerical Control
    • 3.7. Gas Species and Properties
    • 3.8. Initial and Boundary Conditions
    • 3.9. Solid Heat Structures
    • 3.10. Physical Models
    • 3.11. Restart and Output
    • 3.12. GASFLOW Parallelization
  • 4. Pre- and Post-Processing Tools
    • 4.1. GASVIEW
    • 4.2. Pyscan
    • 4.3. Create3D
  • 5. Verification and Validation
    • 5.1.Overview
    • 5.2. Fluid Dynamics
    • 5.3. Combustion
    • 5.4. Heat and Mass Transfer
    • 5.5. Multiphase Flow
  • 6. APPLICATION HIGHLIGHTS
    • 6.1. H2 Fuel Cell Vehicle Accident in Tunnel
    • 6.2. Hydrogen Explosion in a Refueling Station
    • 6.3. Hydrogen Explosion at Fukushima Accident
    • 6.4. Methane Explosion in the Roadway of a Coal Mine
    • 6.5. Aerosols and Droplets
  • 7. Ongoing Development and Enhancements
    • 7.1. Combustion Modeling
    • 7.2. Discrete Particle Modeling
    • 7.3. Heat Transfer Modeling
      • 7.3.1. Time-dependent tables for heat flux and heat transfer coefficient in sinkdef
      • 7.3.2. Thermal Radiation Model for Water Vapor and Carbon Dioxide
  • 8. INPUT FILE EXAMPLES
    • 8.1. Overview
    • 8.1. Fluid Dynamics
  • 8.2. Combustion
  • 8.3. Heat Transfer
  • 8.4. Multiphase Flow
  • 8.5. Applications
  • 9. Frequently Asked Questions
    • 9.1. How to set up models for the flashing of pressurized water?
  • 9.2. How to run GASFLOW on Windows?
  • 9.3. How to export/import WSL distribution?
  • 9.4. How to log into remote WSL from Windows using Terminal and FTP on GASVIEW?
Powered by GitBook
On this page
  1. 7. Ongoing Development and Enhancements

7.3. Heat Transfer Modeling

7.3.1. Time-dependent tables for heat flux and heat transfer coefficient in sinkdef7.3.2. Thermal Radiation Model for Water Vapor and Carbon Dioxide
Previous7.2.2. Particle injection from ring shaped volumesNext7.3.1. Time-dependent tables for heat flux and heat transfer coefficient in sinkdef

Was this helpful?

Was this helpful?